byphineasgray

If you’re considering getting into the t-shirt business, you should become familiar with the different methods available for transferring text, logos, and images to a garment such as a t-shirt.

The two major methods used to transfer an image to a garment are heat transfers, and screen printed transfers.

Both methods have their advantages and disadvantages.

Heat Transfers

The process of heat transfer is much simpler than a screen printed transfer, but the image is not as permanent.

The artwork is printed on a special heat transfer paper. There are different qualities of paper depending on whether it’s intended for personal or professional use. Some consumer level printers are also available which can make higher quality heat transfers.

Once the image is printed on the transfer paper, the paper is pressed onto the garment and then heated for a short time. This melts a material in the paper called plastisol which seeps into the shirt. The back of the paper is then peeled from the shirt while the plastisol and the image remain on the garment.

Screen Printed Transfers

At a professional level, screen printed transfers are the most common. As far as print quality goes, this method of transferring an image to a garment is generally better. A screen print will usually last longer, and maintain higher levels of color saturation than a heat transfer.

A screen transfer is more difficult to do, however, and will require the use of more professional equipment to get a high-quality and long lasting image.

A screen print requires that you use a few different tools. First of all, you’ll need a screen. The screen is a wooden or steel frame with a special mesh material. It is pressed against the garment to transfer the ink. These screens must be cleaned after they are used, and they are quite large. If you plan on screen printing professionally, you should have a designated booth and garden hose with which to clean the screen, as well as an area to dry it.

The artwork is printed on special sheets that activate when exposed to UV light. These sheets are printed directly onto the screen mentioned earlier. This is similar to how photographs in non-digital cameras are exposed. Of course, you will either need self-contained exposure equipment for this, a darkroom or sunlight.

The screen that was mentioned earlier has a special chemical coating on it. This coating is then sprayed with a pressure hose. The chemical will eventually come off of the non-transparent portions of the image.

The screen is then pressed against the garment, and ink is applied to the sheet. The ink is then scrubbed across the screen. The ink will seep into the parts of the screen where the chemical was removed, which ultimately transfers the image to the shirt.

If multiple colors are used in the image or logo, this process will have to be repeated for the various colors.

Aprons: The Necessary Accessory!

by

Josh Stone

For employees who cook in a restaurant kitchen or work in the dining room waiting tables, wearing an apron is often a uniform requirement. While they serve the purpose of preventing grease or coffee spills from soiling work uniform pants and shirts, aprons are also a handy attachment to tote customer needs.

For a waiter or waitress, who usually wear just a half apron that wraps around their waists, it’s important that the frock contain several accessible pocket compartments in which to carry necessities for the job. Not only is this convenient for the time-pressed server, but it will also impress a dine-in customer when the item needed is right at the finger tips of their attendant.

Items which should be carried by a waiter in their apron should include an ordering tablet, two or three pens, straws and matches. If feasible, extra condiments should also be allowed for as part of the supply load, like catsup bottles or packets and creamer and butter samplers. But be sure to protect liquid products from creating a mess within the apron–this happens to even the best of servers! Sometimes, in the rush to fill a demanding customer’s coffee cup, leaning up against the counter or dining table causes a juicy explosion. It is best to keep those types of additives in a side pocket where they are safer.

Yet another issue that accompanies server aprons is the attached adjustable ties that are supposed to be secured on the back side of the waiter. As people come in all shapes and sizes, fastening these strings can be a side-show all in itself. Larger waisted people may have a difficult time tying a bow where the two ends meet because there simply is not enough material. Thinner servers may have to wrap the ties around two or three times before accomplishing a bow to secure the apron. A possible solution would be for management to purchase aprons which will accommodate any shape or size or server to allow for a more uniformed appearance of their staff.

Color choices for restaurant cook aprons usually aren’t that significant. The full cover aprons of the dishwashers, fry cooks and salad makers are rarely seen by the dining public. That is probably a good thing; chances are those hard-working employees in the back are wearing everything from sauces to sauts! Choosing a shade for the waitresses, waiters, hostesses and bus boy’s aprons is a bit more unrestricted and allows for a creative presentation which compliments the dcor of the restaurant dining room or color scheme of the table cloths and furniture.

Lastly, when choosing aprons for restaurant employees, select material that can easily be washed and sanitized and does not require too much effort for stain removal. Although employees are hard-working and dependable, they also have lives outside of the restaurant that may restrict time for uniform upkeep. If possible, provide at least two aprons to each server or cook.

Freelance writer for over eleven years.

Chef ApronsRestaurant ApronsDickies Nursing Uniform Scrubs

Article Source:

Aprons: The Necessary Accessory!}

bytimothyharvard

When buying top quality, hand crafted exterior doors, it is always important to consider having the stain put on the door at the company. This is particularly true if the door has sidelites, a transom or both as these are considerably more complicated to stain perfectly to the same color of the stained doors without proper experience.

However, even if you do buy stained doors from the company, there will come a time when the stain needs to be redone. This will depend on the exposure of the door to direct sun, rain and wind as well as the wear and tear on the door over time.

Removing Doors

The key to getting stained doors to have a beautiful, uniform application of stain without streaking or running is to remove the door before doing any work. This is done by removing the hinges and then placing the door on a flat surface.

Do not use an uneven surface as this can damage the door. It can also cause the door to rub in some areas and scratch and damage the wood or the glass.

Remove the Old Stain

Use the stain remover recommended by the company. Stained doors will need to be stripped of the old stain and then washed and sanded before new stain is applied. Sanding is used to create a smooth, uniform surface which will take the new stain and create a consistent color.

Always make sure the door completely dries between each step and remove any grit or debris from sanding with a soft cloth. The cleaner and smoother the door is, the better the final result with stained doors of any wood type.

Apply the New Stain

When choosing stain for your stained doors use a stain type recommended by the door manufacturer. Apply the stain according to directions, working in small areas, and completing the entire door at one time. Avoid doing only parts of the door as this will cause irregular coloration.

Allow the stain to dry completely before applying the varnish or sealant to stained doors. The sidelites and transom will be done using the same process, but they will not be taken down to prepare and stain.

If you are not comfortable with the process, most carpenters and painters can also complete your stained doors. Be sure to ask about their experience and expertise to ensure they can do the job the way you want it done.

Let us handle the stain on all the stained doors from our extensive online inventory. As the first door company to sell doors online, we have the experience to make your door look beautiful. To learn more visit Nick’s Building Supply, Inc. or go to www.nicksbuilding.com. You can also visit our Facebook page for more information.

Clickbank and ELeavers.com

by

arvind

Clickbank and ELeavers.com

ELeavers.com has become one of the main sources of traffic for Clickbank affiliates and Clickbank vendors. As it is well known, that there is hundreds

of thousands of dollars to be made every day from Clickbank affiliate programs, where you promote existing products from Clickbank.

Most of the time, you even get a higher percentage than the product owner. Affiliates can get up to 75% of each sale. This is fairly well known now and

is income totally available to everyone. The big question is how to get buyers.

You probably have heard many people saying they are making thousands of dollars every day from the Clickbank affiliate program. You have probably had

your affiliate account set up and displaying text ad links and banners on your website and blog. And every day you check your Clickbank affiliate account

looking sales but it still says zero.

You are left wondering: What are others doing differently to make all the money?

The answer is one word: eLeavers.com

With the very low cost that eLeavers.com charges per click and their high quality of traffic, it has become heaven for Clickbank affiliates and vendors

alike. ELeavers.com allows a very low bid start at $0.008 while with Google AdWords you can not bid less than $0.5

Also, eLeavers.com allows advertisers to put any number of affiliate links on their account, while Google AdWords allows only 1 per account.

ELeavers.com is very easy to use, while Google Adwords requires the user to be fairly tech savvy to be able to use it.

If you want to make money selling Clickbank product and are looking to find buyers, eLeavers.com is the answer. Its where to find all the traffic you

need to sell your affiliate Clickbank product and how make thousands of dollars daily on auto pilot, like the masters.

The genius of ELeavers.com lies in the advertisers ability to completely control the cost of their daily, weekly and monthly

ad spending. It can change as a budget is adjusted. The system is also time effective in that signing up takes only minutes

and a small deposit ($10). Then, as soon as an advertiser becomes a member, they can compose ads and submit them to the system

for approval. As long as the content is not offensive, it will be approved immediately. Simultaneously, the ELeavers.com system

also scans the content and matches it with the content on a compatible site, to ensure the audience is appropriate and amenable

to the type of product or service being advertised.

As long as the funds are deposited and there is no date restriction, the ad will be placed. How well and fast it is placed is guaranteed by the advertiser checking the link on ELeavers.com which allows all members to View Recommended CPC and ensuring

their bid is in line competitively. With those three qualifications in place, ads will be placed within minutes of their creation. Once the process is familiar, the whole thing can be done in less than 15 minutes from creation to placement and clicks.

The only things that will slow down the process are specific dates or keywords which will limit placement, or content which contains ads for adult sites, racist sites or anything else deemed offensive to the general public. Advertisers who choose ELeavers are pleased with the cost, speed, ease and success that the network gives them with whatever effort they have to

expend at the moment.

Full time SEO expert and working part time as blogger and writer. Clickbank affilaite, advertiser and publisher at eLeavers.com the

ELeaverArticle Source: eArticlesOnline.com}